Saturday December 4, 2021
SNc Channels:



Oct-17-2011 08:02printcomments

Paving The Way With Hempcrete

Hemp is a remarkable natural resource with many uses still untapped.

The industrial hemp movement- making big waves.

(VICTORIA, B.C.) - For enthusiasts, it’s all about cementing the power of the industrial hemp movement right into people’s homes. You might ask, squinting one eye, and jutting forward to re-read...Hempcrete? Say what!

When it comes to hemp, the ranges of uses (including food, clothing, rope, paper, soap, cosmetics, and even fuel) are well-known. One not so readily understood usage, is hemp as a building material, and the science behind hemp composites. Hemp used in major construction is an innovation that’s already with us. In our last edition, we learned that here in B.C. there are plans for a manufacturing facility using industrial hemp to produce construction material.

The concept of industrial hemp in use as a building material is not only altering how we build in practice, but also how we conceptualize a sustainable development and build a new economy in Canada and beyond.

Yes, there’s a ways to go, but indeed it’s encouraging “big news.” So, taking from that, we need to delve deeper into the research, now, to find out why it’s taken so long for environmental modelling techniques for hemp construction to be validated. Much design guidance is needed in an expanding “hemp-as-a-building-material” industry since it is already in demand by contractors and their carpenters.

I can’t tell you how many builders have expressed the desire to work with hempcrete!

If more people are to get on board with the industrial hemp movement there will be a growing need for hemp as building material 101 education courses. Here’s a quick synopsis of the basic terms you might see floating around the internet, all legitimately presenting the low-carbon footprint potential. Hempcrete has an energy saving of 67 percent over using traditional concrete.

Marketed under names such as “Hemcrete,” “Canobiote,” “Canosmose,” and “Isochanvre,” these terms refer to a mixture of hemp hurds (a woody chip-like substance) and lime, used as material in a construction project.

The hemp-lime combination material is the lightweight composite material that combines the renewable plant-based aggregates, often referred to as the fast-growing hemp shiv, mixed in with a lime based binder. Sound simple? Depending on preference for building materials, hemp herds may be mixed with lime and sand and/or cement, as well.

An experienced contractor once told me that hempcrete is easier to work with than traditional mixes, and it’s less dense than concrete. Is that good? There are different things you can do with hemp, so it depends on need. For instance, Isochanvre, out of France, is suited to their historically stone-based edifices which have existed in the country for centuries.

It lends itself well and is known as “the method of crystallizing the hemp sap.” It is mixed with hydraulic lime and water to bind it together, then packed into timber formwork and left to solidify like concrete.

Moreover, I’m told by a talented and charming finish carpenter that when hemp hurds are mixed with a combination of lime products, they can produce a lightweight insulating plaster which can be cast around a timber frame or sprayed against a wooden or even stone form. He went on to say that in construction, a material has to have good working value and what’s being used must be durable, water-proof, fireproof, possess reliable insulating value, and it must be strong—otherwise you wouldn’t want to live in that house, right?

Such housing must retain heat in winter and keep cool in summer, and have breathable properties. In addition, it must be cheap to build in terms of the material itself and the labour hours it takes to build.

An integrated processing factory and development is essential, which explains the incentive for a large-scale facility in 100 Mile House, intended to feed market demand. Any credible industrial hemp publication will describe how to use hemp as a building material. It usually goes something like this:

House foundations can be made out of hemp hurds. Here is a sample explanation of the use, for example. On the site, assume a plywood frame is in place—needless to say this could be hemp plywood. An expert would fill with a mixture of hemp hurd, and combine with lime, sand, plaster, some cement, and enough water to dampen.

The mixture has to set a day or more. Then, take the frame down but let the mixture continue to harden for approximately a week. The lime and the hurds create a reaction which binds the mixture together.

More about the hemp plant.

It grows voraciously and represents a fine form of a renewable resource. A crop can be grown without the use of herbicides or insecticides. It takes one hectare of land to grow, in approximately four months, sufficient hemp to build a three-bedroom house. This estimated production amounts to four tonnes of material per acre per year.

Hemp is categorized as a bast fibre crop. It sports a stem made of an outer skin with strong lengthy fibres, and a core, or what’s called pith. Once processed, the stems turn into in two things: hurds and fibres. It is the properties of these materials which make them so adaptable to building construction.

What’s not so obvious, however, is why such barriers exist to move the industry forward. There are many experiments using hemp composite materials in building development all over the world, but due to social stigma, there are not that many well publicized buildings about which we can authoritatively speak in a workshop environment.

It’s clear from journalistic probing, that many carpenters enjoy working with hemp, but they may not want their businesses associated with the plant, for fear of being pigeon-holed.

However, this is not to say that the stigma shouldn’t be eradicated. Hemp homes do exist, in even more abundance, in France, the UK, Germany, and now South Africa.

Well known in the U.S. is the Pine Ridge Reservation, in South Dakota. There sits a community hemp house built as a model for sustainable economic redevelopment. It contains hemp insulation and stands as an experiment with hemp fibre reinforced cement board.

The gospel on hemp is that it can be converted into a building material and processed in such a way for it to be usable to make window panes, sills, roofs, floors, wallboards etc. In addition, it can be used as plaster and caulking.

Then there is hemp plywood, insulation made from hemp composite, and/or insulation panels. Also pipes, bricks, and/or green bio-degradable plastic composites.

Study, study, study

But there are some cautionary tales. The key here is how it’s done. One of the most interesting studies comes out of the University of Bath, in the UK, and the BRE Centre for Innovative Construction materials, with Peter Walker and Dr. Mike Lawrence. It’s called “Developing hemp-line low-carbon construction for mainstream uptake through innovation and optimization,” and explores spray applied hemp-lime, specifically, as a place to focus research and experiments in usage.

This study stresses the spray application of hemp-lime as a recent innovation. It is said to “increase the rate of application [of material] and has potential for wider adoption by mainstream construction.

It also offers opportunities for significant innovation with both material formulations and forms of wall construction” However, there are barriers which are interfering with its use, the study argues, including “a lack of confidence in the use and performance of a plant based material; lack of design guidance (including construction details and specification); and limited understanding of hygrothermal material behaviour.”

There are other reports from the ground and cautionary tales. Hempcrete can only be used if it holds up over the long-term and is found to have excellent durability. That would be a normal expectation.

There have been instances of cracking and softness, causes of which are not entirely understood. It’s likely that strict ratios were not followed. Experimental projects are therefore necessary, and will need funding together with the help of politicians to spread the word.

Errors are simply a reflection of a new building product where we haven’t, so far, had the resources or demand to properly research and develop.

The person who is in charge of the hempcrete portion of the building must have full construction training and must not be new to natural building techniques employing hemp and lime.

Without solid expertise one could easily imagine having the wrong ratios of material components, improper curing methods, not enough soak time etc., and needless to say this could lead to cracking or softness. It’s experimental. However, we can expect that a hemp building material, produced through industry, will receive the R&D needed for it to be durable and viable.

Final point. The U.S. Green Building Council contains the stat. that [traditional] buildings account for roughly 38 percent of all carbon dioxide (CO2) emissions in the country alone (Source: Pew That alone dictates a need to make much greater and significant use of hemp composites in our construction industry.

More information for readers: A useful resource
Hemp building materials video
The Canadian Hemp Trade Alliance, started in 2003 helps to co-ordinate research
background information
Story about a hemp house in South Africa
Pew Climate

Originally published here:


Diane Walsh, MA, is an investigative journalist based in the Pacific Northwest. She contributes to new media outlets, newspapers which by some miracle haven't gone under, and magazines in the US, Canada and Europe. Diane became acquainted with the team during a recent speaking tour that included Canada. She is a welcome addition to our lineup of truth-bound thoughtful and extremely talented writers.

For more information on specific publications and to reach Diane directly, please visit:

Comments Leave a comment on this story.

All comments and messages are approved by people and self promotional links or unacceptable comments are denied.

john allen February 17, 2017 9:11 am (Pacific time)

Are there any studies as far as hemp being used in road material in the United States? It would be very beneficial if we find a way of the usage of this natural plant to be used in this country's infrastructure. Not only for profit but the company would be a pioneer for saving this country's road.

Chris Magwood March 25, 2014 11:45 am (Pacific time)

Just a note to say that the photo of the hempcrete benchtop at the top of the article is from the Camp Kawartha Environment Centre, a project of The Endeavour Centre,

Thank you!

Kevin November 11, 2011 6:09 pm (Pacific time)

I visited the hempcrete house on the Pine Ridge Reservation. It was a solid structure! The builders' main complaint was that they had to import hemp at $200 per bag, as opposed to growing it for free. The DEA arrests anyone growing non-drug hemp in the U.S. No wonder the U.S. has 10% unemployment!

dr.parameswaran October 19, 2011 4:05 pm (Pacific time)

It is an excellent article -both in its content and clarity. In fact, in several homes in remote villages in India, a similar construction material made out of hay stack (also known as 'straw' which is obtained from waste top portion of rice plant) and clay/lime had been used for many decades. The country with most of its population eating rice as the primary food, the waste hay stack is produced in abundance. Making light weight concrete products using cement or lime with a suitable admixture should be easy and will certainly pose no problem in marketing.


[Return to Top]
©2021 All opinions expressed in this article are those of the author and do not necessarily reflect those of

Articles for October 16, 2011 | Articles for October 17, 2011 | Articles for October 18, 2011
Sean Flynn was a photojournalist in Vietnam, taken captive in 1970 in Cambodia and never seen again.

Annual Hemp Festival & Event Calendar

Your customers are looking: Advertise on!

Donate to and help us keep the news flowing! Thank you.